EasyManua.ls Logo

Festool BHC 18 - Operation; Changing the Battery Pack

Festool BHC 18
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Intended use
Cordless rotary hammer suitable
for hammer drilling in concrete, brick and stone,
for drilling in wood, metal, ceramic and plastic
with no impact function,
for inserting and tightening screws.
Charger TCL 3
suitable for
–charging Festool battery packs: BP, BPS and
BPC (NiMH, NiCd, li-ion are recognised automat-
ically.)
indoor use only.
Operation
Changing the battery pack
Festool charger
NOTE:
This equipment has been tested and found to
comply with the limits for a Class 8 digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential instal-
lation. This equipment generates, uses and can ra-
diate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communica-
tions. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If
this equipment does cause harmful interference to
radio or television reception, which can be deter-
mined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
WARNING
The user bears the responsibility for damage and
accidents caused by improper use; this also in-
cludes damage and wear caused by continuous
use in industry.
WARNING
Unauthorised voltage or frequency!
Risk of accidents
Observe the specifications on the machine’s
name plate.
Observe country-specific regulations.
2
Inserting battery pack
click
Removing battery pack
1
2

Other manuals for Festool BHC 18