WARNING
To prevent accidents, always remove the
plug
from the power supply socket before
carrying out any maintenance or repair work
on the tool!
► Do not use compressed air to clean the
electrical tool! Do not try to clean parts in
side the tool in this way, as you could let
foreign objects in through the openings of
the tool housing.
A dust test must be performed at least once a
year
by the manufacturer or an instructed per
son. This test may include checks to determine
whether the filter is damaged, the machine is
sealed properly and the monitoring features
are functioning correctly.
During maintenance and repair work, all com
ponents that cannot be cleaned satisfactorily
must be replaced. The old components must be
sealed in impermeable plastic bags prior to dis
posal in compliance with applicable regulations
for this type of waste.
Customer service and repair only through
manufacturer
or service workshops: Please
find the nearest address at: www.festoolu
sa.com/service
Use only original Festool spare parts! Order No.
at: www.festoolusa.com/service
13 Accessories
Use only original Festool accessories and Fes
tool
consumable material intended for this ma
chine because these components are designed
specifically for the machine. Using accessories
and consumable material from other suppliers
will most likely affect the quality of your work
ing results and limit any warranty claims. Ma
chine wear or your own personal workload may
increase depending on the application. Protect
yourself and your machine, and preserve your
warranty claims by always using original Fes
tool accessories and Festool consumable mate
rial!
The accessory and tool order number can be
found
in the Festool catalog or on the Internet
under www.festoolusa.com.
14 Disposal
Do not throw the power tool in your household
waste!! Dispose of machines, accessories and
packaging at an environmentally responsible
recycling centre. Observe the valid national
regulations.
English
15
To Next Page
Loading...
