Festool CT 36 E AC - Technical data; Functional description; Intended use

The risk from these exposures varies, depend
ing
on how often you do this type of work. To re
duce your exposure to these chemicals: work in
a well ventilated area, and work with approved
safety equipment, such as dust masks that are
specially
designed to filter out microscopic par
ticles. Wash hands after handling.
WARNING
TO REDUCE THE RISK OF INJURY, USER
MUST READ INSTRUCTION MANUAL.
4 Technical data
Dust extractor CT 36 E AC
Power consumption (dust extractor only)
2.9 - 8.3 A (350 - 1000 W)
[1]
.)
Total connected load max. 12 A (1440 W)
Max. rating of connected Power Tool
3.7 A
[2].)
Volume flow (air), turbine max. 234 m³/h (8264 cu.ft./h)
Vacuum, turbine max. 24000 Pa
Filter surface 6318 cm² (979.3 sq.in.)
Suction hose (diameter x length) 36 mm x 3.5 m (1-7/16" x 11.5’)
Protection type IP X4
Sound pressure level as per IEC 60704-2-1 71 dB(A)
Container capacity CT 36 E AC 36 l (9.5 gal.)
Dimensions L x W x H CT 36 E AC 630 x 365 x 596 mm (24.8 in. x 14.4 in. x 23.4
in.)
Weight CT 36 E AC 15.2 kg (33.5 lbs)
5 Functional description
The pictures for the functional description are
on
a fold-out page at the beginning of the in
struction manual. When reading of the manual
you can fold out this page for having always an
overview of the machine.
Accessories shown or described are sometimes
not included in the scope of delivery.
[1-1]
Intake opening
[1-2]
Module slot
[1-3]
Appliance socket
[1-4]
Hose store
[1-5]
Handle
[1-6]
SysDoc
[1-7]
Automatic cleaning
[1-8]
Suction power adjuster
[1-9]
Switch
[1-10]
Locking clip
[1-11]
Dust container
[1-13]
Brake
6 Intended use
The dust extractor is designed for use as speci
fied
for the aspiration and evacuation of non-
noxious dusts, dirt, sand, shavings etc..
The dust extractor is designed as specified for
vacuuming water.
The dust extractor is designed for household,
commercial or both use.
[1] ) 8.3 A (1000 W) is the medium value for different operation conditions, a maximum power consumption of 10 A (1200 W) is possible.
[2] ) When the suction power adjuster [1-7] is adjusted to the lowest suction power (see page Page 10, chapter - 8.4 ) the maximal rating of a
connected power tool can be 9.1 Amps.
English
8