► Insert the retainer [9-2] and fold over the
lever [9-3] until it engages.
► Replace the top section [2-1]
and close the
locking clips
[2-2].
9-1
9-3
9
9-2
1
2
3
5
4
HF-CT26/36/48
11 After finishing work
► Switch off the mobile dust extractor and
disconnect the plug.
► Wind up the mains power cable.
► Empty the dust container.
CAUTION
Hazardous dust
Damage to the respiratory passage
► Wipe down the mobile dust extractor and
clean all accessories thoroughly using the
extractor (inside and out) before removing
from the working area.
► Parts that you were not able to clean thor
oughly must be sealed in an airtight plastic
bag prior to transportation.
► Wear a dust mask!
► Place the mobile dust extractor in a dry
room inaccessible to unauthorised users.
11.1 Emptying the dust container
The dust container [2-3] can be emptied once
the top section has been removed.
► After extracting fluids, clean the fill level
sensors [10-1] regularly with a soft cloth
and inspect for damage.
12 Service and maintenance
WARNING
Any maintenance or repair work that re
quires
opening of the motor or gear housing
should only be carried out by an authorised
Customer Service Centre (name supplied by
your dealer)!
► Maintenance or repair work carried out by
an unauthorised person can lead to the
wrong connection of the power leads or
other components, which in turn can lead
to accidents with serious consequences.
English
14
To Next Page
Loading...
