Festool Domino DF 500 User Manual

Accessories
Mortising Bits:
Carbide Tipped. Sold separately or in a set of
all four.
Sizes
► 5 mm
► 6 mm
► 8 mm
► 10 mm
Domino Tenons:
Sold separately or in an assortment.
Sizes
► 5 mm x 30 mm
► 6 mm x 40 mm
► 8 mm x 40 mm
► 8 mm x 50 mm
► 10 mm x 50 mm
The assortment Systainer includes:
► 5 mm x 30 mm - 600 pieces
► 6 mm x 40 mm - 190 pieces
► 8 mm x 40 mm - 130 pieces
► 8 mm x 50 mm - 100 pieces
► 10 mm x 50 mm - 85 pieces
► Set of 4 mortising bits
► Systainer – size #2
Narrow Frame Fence:
The narrow frame fence (also called the Trim
Stop) is used to firmly hold smaller frame
pieces while milling Domino mortises.
Outrigger Guides:
The outrigger guides (also called the Cross
Stop) are used to extend the distance of the
locating pins for positioning Domino mortises
without needing to draw marking lines.
Dowel Guide:
The dowel guide (also called the Handrail
Fence) is used to center a round workpiece in
front of the cutter for mortising.
Instruction Manual 23

Festool Domino DF 500 Specifications

General

Power consumption	420 W
Max. routing depth	28 mm
Cutter diameter	4, 5, 6, 8, 10 mm
Dust extraction connection diameter	27 mm
Weight	3.2 kg
Voltage	230 V
Frequency	50/60 Hz
No-load speed	10, 000 rpm
Mitre routing	0° - 90°
Mortise depth	15 mm, 20 mm, 25 mm, 28 mm