6
Contents
About this manual
Save these instructions
It is important for you to read and understand this manual. The information it contains relates to protecting
your safety
and
preventing problems
. The symbols below are used to help you recognize this information.
Symbols
About this manual ...................................... 6
Symbols ...................................................... 6
Safety instructions...................................... 7
General safety instructions.................. 7
Machine-related safety instructions.... 8
Metal processing.................................. 8
Health hazard by dust .......................... 8
Intended use ............................................... 9
Technical data............................................. 9
Functional description................................ 9
Operation .................................................... 10
Settings....................................................... 10
Electronics............................................ 10
Setting and adjusting the speed .......... 10
Extractor signal ................................... 10
Replacing the sanding pad [3] ............. 11
Attaching sanding accessories using
StickFix [4] ........................................... 12
Dust extraction..................................... 12
Working with the machine ......................... 12
Service and maintenance........................... 13
Sanding pad brake ............................... 14
Cleaning the extraction channels........ 14
Accessories ................................................ 14
Environment............................................... 14
Warranty..................................................... 14
DANGER Description of imminent haz-
ard and failure to avoid hazard
will result in death.
WARNING Description of hazard and
possible resulting injures or
death.
CAUTION Description of hazard and
possible resulting injuries.
NOTICE Statement including nature of
hazard and possible result.
HINT Indicates information, notes,
or tips for improving your suc-
cess using the tool.
Vvolts
A amperes
Hz hertz
~
a.c.
alternating current
d.c.
direct current
n
0
no load speed
Class II construction
rpm
min
-1
revolutions per minute
’’ inch
lb. pound
diameter
hint, tipp
Warning of general danger
Risk of electric shock
To Next Page
Loading...
