9
construction activities contains chemicals known
(to the State of California) to cause cancer, birth de-
fects or other reproductive harm. Some examples
of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemically treated
lumber.
The risk from these exposures
varies, depending on how often
you do this type of work. To re-
duce your exposure to these
chemicals: work in a well ven-
tilated area, and work with ap-
proved safety equipment, such as dust masks that
are specially designed to filter out microscopic par-
ticles. Wash hands after handling.
Intended use
As specified, the sanders are designed for sanding
wood, plastic, composite, paintwork, filler and sim-
ilar materials. The special safety information must
be observed when sanding metal. Material contain-
ing asbestos cannot be processed.
The user is liable for improper or non-in-
tended use.
Technical data
Functional description
The pictures for the functional description are on a
fold-out page at the beginning of the instruction
manual. When reading of the manual you can fold
out this page for having always an overview of the
machine.
WARNING
TO REDUCE THE RISK OF INJURY, USER MUST
READ INSTRUCTION MANUAL.
Eccentric sander ETS EC 150/3 A EQ ETS EC 150/5 A EQ
Power 400 W 400 W
Idle speed 6000 - 10000 min
-1
6000 - 10000 min
-1
Sanding stroke 3,0 mm (0.12 in.) 5,0 mm (0.20 in.)
Sanding pad D 150 mm (5.9 in.) D 150 mm (5.9 in.)
Weight (without mains cable, with sanding pad) 1,2 kg (2.65 lb) 1,2 kg (2.65 lb)
Safety class /II /II
[1-1]
ON/OFF button
[1-2]
Speed control
[1-3]
Sanding pad
[1-4]
Plug it-connection
[1-5]
Extractor connector
[1-6]
LED for extractor signal
To Next Page
Loading...
