EasyManua.ls Logo

Festool ETS EC 150/3 EQ - Technical Data and Components; Sander Specifications; Controls and Connection Interfaces; Sanding Pad and Grip Surfaces

Festool ETS EC 150/3 EQ
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
sanding damp surfaces, special safety instruc
tions must be followed. The sanders are not in
tended to be suitable for grinding bare metal.
Material containing asbestos cannot be pro
cessed.
The user is liable for improper or non-in
tended use.
4 Technical data
ETS EC eccentric sander 150/3 EQ 150/3 EQA 150/5 EQ 150/5 EQA
Power 400 W 400 W
No-load speed
6000–10,000 rpm 6000–10,000 rpm
Sanding stroke 3.0 mm 5.0 mm
Sanding pad D 150 mm D 150 mm
Electronic extraction detection - x - x
1.2 kg 1.2 kgWeight as per EPTA procedure 01:2014
5 Geräteelemente
[1-1]
ON/OFF button
[1-2]
Speed control
[1-3]
Sanding pad
[1-4]
Plug-it connection
[1-5]
Extractor connector
[1-6]
LED for extractor signal *
[1-7]
Insulated gripping surfaces (grey sha
ded area)
* Only for power tools with electronic extractor
signal (see technical data).
The specified illustrations appear at the begin
ning of the Operating Instructions.
6 Operation
WARNING
Unauthorised voltage or frequency.
Risk of accidents
The mains voltage and the frequency of the
power source must correspond to the
specifications on the name plate.
In North America, only Festool machines
with the voltage specifications 120 V/60 Hz
may be used.
CAUTION
Heating of the Plug it connection if bayonet
fitting is not completely locked
Risk of burns
Before switching on the power tool, make
sure that the bayonet fitting at the mains
cable is closed fully and locked.
Connecting and disconnecting the mains power
cable - see fig. [2].
6.1 Switching on/off [1-1]
ON
Press the ON/OFF button [1-1]
OFF
Press the ON/OFF button [1-1]
7 Settings
WARNING
Risk of injury, electric shock
Always disconnect the mains plug from the
socket before performing any work on the
machine.
7.1 Electronics
The machine features full-wave electronics
with the following properties:
Smooth start-up
The electronically controlled smooth start-up
function ensures that the power tool starts up
smoothly.
Constant speed
The preselected motor speed is kept constant
through electronic control. This ensures a uni
form cutting speed even when under load.
English
14

Other manuals for Festool ETS EC 150/3 EQ

Related product manuals