Festool ETS150/3 EQ User Manual

8
• sanding edges on wooden parts
• smoothing primed wooden surfaces.
3 - 4
• sanding full wooden and veneer edges
• sanding in the grooves/rebates of windows and
doors
• interim paint sanding on edges
• pre-sanding natural wood windows with sanding
vlies
• smoothing wood surfaces with sanding felt prior
to staining
• rubbing down stained surfaces with sanding vlies
• rubbing down or removing excess lime paste with
sanding vlies
2 - 3
• interim paint sanding on stained surfaces
• cleaning natural wood window grooves with sand-
ing felt
1 - 2
• sanding stained edges
• sanding thermoplastic synthetics
Maintenance and care
Any maintenance or repair work
requiring the motor housing to be opened may only
be carried out by an authorised service workshop.
Maintenance or repair work carried out by an unau-
thorised person can lead to the wrong connection of
the power leads or other components, which in turn
can lead to accidents with serious consequences.
Always remove the plug from the
mains supply socket before carrying out any work
on the machine!
Always keep the machine and the ventilation slots
clean.
Sanding base brakes
The sanding base is braked by a collar (6.2) in order
to prevent any uncontrolled excessive speed of the
sanding base. Because the collar wears down in
the course of time, it has to be replaced by a new
one (453388) as soon as there is any reduction in
the braking effect.
Accessories, tools
For safety reasons, only use original
Festool accessories and tools!

Festool ETS150/3 EQ Specifications

General

Orbit Diameter	3 mm
Pad Size	150 mm
Power Consumption	310 W
Weight	1.8 kg
Dust Extraction Connection Diameter	27 mm
Speed	4, 000 - 10, 000 RPM
Interchangeable sanding pad diameter	150 mm
Cable Length	4 m
Dust Extraction	Yes