MFT
7
GB
L
The corner feet
[1-2]
are fitted with rubber caps
so that the bench stands securely when the
foldaway legs are folded in.
7Assembly
7.1 Mounting of
KAPEX
The perforated top on the MFT /
KAPEX
was spe-
cially designed for mounting the KS 120/KS 88.
X
As described in image
[2]
, position the electric
power tool on the MFT /
KAPEX
.
X
Secure electric power tool at MFT using clamps.
7.2 Mounting of
CONTURO
The perforated top on the MFT / 3
CONTURO
was specially designed for mounting the KA 65.
X
Image
[3A]
: Mount the cross brace MFT 3-QT
[1-4]
, as described in the assembly instructions
for the cross brace, at the MFT/3
CONTU-
RO
.
X
Image
[3B]
: Insert adapter plate AP-KA 65
[1-5]
,
as described in the assembly instructions for
the adapter plate, in the recess at the MFT/3
CONTURO
.
X
Image
[3C]
: Install edge bander KA 65, as de-
scribed in the assembly instructions for the
adapter plate, in the adapter plate AP-KA 65.
X
Glueing the edge band. Observe the operating
instructions for the edge bander KA 65.
L
All operating instructions for Festool devices
can be found online at www.festool.com
8 Service and maintenance
Customer service and repair
only
through manufacturer or service
workshops: Please find the nearest
address at: www.festool.com/service
Only use original Festool spare parts!
Order No. at: www.festool.com/service
9Environment
Do not dispose of the device as domestic waste!
Dispose of machines, accessories and packaging at
an environmentally responsible recycling centre.
Observe the respective national regulations.
Information on REACh:
www.festool.com/reach
EKAT
1
2
3
5
4
To Next Page
Loading...
Need help?
General