Problem Possible causes Remedy
The surface control
light does not switch on
when the power tool is
started and the LED
may light up green.
Surface control light auto-
start function is deactivated
in the Festool Work app.
To switch to factory settings, see Section 8.8 or
see the Festool Work app.
The surface control light is
faulty.
Have the surface control light replaced by an au
thorised customer service workshop.
If problems other than those listed occur, please contact a Festool service workshop or local spe
cialist dealer, see Section 10
.
English
23
To Next Page
Loading...
