12
RO 90 DX FEQ
GB
Original operating manual
1Symbols
2Technical data
3 Machine features
* not on all versions included in the scope of deliv-
ery
The specified illustrations appear at the beginning
of the Operating Instructions.
4 Intended use
As specified, the machines is designed for sanding
and polishing plastic, metal, wood, composite ma-
terials, paint/clear coats, filler and similar materi-
als. Materials containing asbestos must not be pro-
cessed.
To guarantee electrical safety, the machine must
not be damp or operated in a damp environment.
The machine must only be used for dry sanding.
The user is liable for improper or non-in-
tended use.
5 Safety instructions
5.1 General safety instructions
WARNING!
Read all safety warnings, in-
structions, illustrations and specifications
provided with this power tool.
Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
5.2 Machine-related safety instructions
–
Harmful/toxic dust can be produced during your
work (e.g. lead-containing paint, some types of
wood and metal).
Contact with this dust, espe-
cially inhaling it, can represent a hazard for oper-
ating personnel or persons in the vicinity. Comply
with the safety regulations that apply in your
country. Connect the electric power tool to a suit-
able extraction system.
To protect your health, wear a P2 protective
mask.
Always wear protective goggles to protect
against sanding hazards.
–
Prevent liquid polish from seeping into the ma-
chine.
The penetration of liquid polish into the
power tool increases the risk of electric shock.
Symbol Significance
Warning of general danger
Risk of electric shock
Read operating instructions and safety
notices!
Wear ear protection.
Wear protective gloves.
Wear a dust mask.
Wear protective goggles.
Disconnect from the power supply!
Do not dispose of with domestic waste.
Tip or advice
Handling instruction
Gear-driven eccentric sander RO90 DX FEQ
Power 400 W
Speed
Eccentric motion 3000 - 7000 min
-1
Rotex rotary motion 220 - 520 min
-1
Sanding stroke 3,0 mm
FastFix sanding pad dia. 90 mm
Weight (without mains cable,
with sanding pad)
1,45 kg
Safety class /II
[1-1]
Protector
[1-2]
Change-over switch/spindle stop
[1-3]
On/Off switch
[1-4]
Mains power cable
[1-5]
Extractor connector
[1-6]
Speed control
[1-7]
Sanding pad
[1-8]
Stop rod
[1-9]
Polishing pad*
[1-10]
Delta sanding pad
[1-11]
Slat sanding pad*
[1-12]
Interface pad*
To Next Page
Loading...
Need help?
General
