10
The risk from these exposures
varies, depending on how often
you do this type of work. To re-
duce your exposure to these
chemicals: work in a well ven-
tilated area, and work with ap-
proved safety equipment, such as dust masks that
are specially designed to filter out microscopic par-
ticles. Wash hands after handling.
Intended use
The sanders are designed for sanding wood, plas-
tic, composites, paint/varnish, filler and similar
materials as directed. Metals and materials that
contain asbestos must not be processed.
To guarantee electrical safety, the machine must
not be damp or operated in a damp environment.
The machine must only be used for dry sanding.
The user is liable for improper or non-in-
tended use.
Technical data
Functional description
The pictures for the functional description are on a
fold-out page at the beginning of the instruction
manual. While reading the manual you can fold out
the page for comparison and quick reference.
* not on all versions included in the scope of deliv-
ery
WARNING
TO REDUCE THE RISK OF INJURY, USER MUST
READ INSTRUCTION MANUAL.
Cordless orbital sander DTSC 400Li RTSC 400Li
Voltage 18 - 20 V 18 - 20 V
No-load speed 6000 - 10000 min
-1
6000 - 10000 min
-1
Sanding stroke 5/64" (2.0 mm) 5/64" (2.0 mm)
Sanding pad 4"x 6"
(100 x 150 mm)
3-5/32" x 5-1/4"
(80 x 130 mm)
Weight (excl. battery pack, incl. sanding pad) 2 lbs (1.0 kg) 2 lbs (1.0 kg)
[1-1]
On/Off switch
[1-2]
Battery pack
[1-3]
Capacity display
[1-4]
Extractor connector
[1-5]
Speed control
[1-6]
Sanding pad
[1-7]
Edge protector
[1-8]
Handle (insulated gripping surface)
[1-9]
Mains adapter with plug-it connection*
[1-10]
Plug-it cable*
[1-11]
Long-life dust bag
To Next Page
Loading...
