Festool RTSC 400 Li - Commissioning; Switch Operation; Battery Pack Handling; Mains Adapter Use

11
Commissioning
Switch on/off
The switch [1-1] is an on/off switch (I = ON, 0 =
OFF).
 When the battery is empty, or if there is a power
failure or the mains plug is removed, move the
on/off switch immediately to the Off position.
This prevents uncontrolled restarting.
Battery pack
 Inserting the battery pack [2a]
 Removing the battery pack [2b]
Capacity display
Pressing the green button on the capacity display
[1-3] shows the charge status of the battery pack:
Mains adapter
The mains adapter (available as an accessory de-
pending on the model) facilitates use of the cord-
less sanding technology with mains power, en-
abling you to switch between power supply sources.
The mains adapter enables the mobile dust ex-
tractor's automatic electronic switch-on/shut-off
function.
 For older mobile dust extractors, the automatic
electronic switch-on/shut-off may only be acti-
70 - 100%
40 - 70%
2a
2b
1
2 1
2
15 - 40%
< 15%
Recommendation: Charge battery
pack before further use.
WARNING
Unauthorised voltage or frequency!
Risk of accident
 The mains voltage and the frequency of the pow-
er source must correspond with the specifica-
tions on the machine's name plate.
 In North America, only Festool machines with
the voltage specifications 120 V/60 Hz may be
used.