Contents
1 About this manual....................................... 6
2 Symbols.......................................................6
3 Safety warnings...........................................7
4 Intended use
..............................................11
5 Technical data........................................... 11
6 Functional description.............................. 11
7 Commissioning..........................................11
8 Settings......................................................12
9 Working with the electric power tool........15
10 Service and maintenance..........................17
11 Accessories............................................... 18
12 Environment..............................................19
13 General information..................................19
1 About this manual
Save these instructions
It is important for you to read and understand
this manual. The information it contains relates
to protecting your safety and preventing prob
lems
. The symbols below are used to help you
recognize this information.
DANGER Description of imminent
hazard and failure to avoid
hazard will result in death.
WARN
ING
Description of hazard and
possible resulting injures
or death.
CAUTION Description of hazard and
possible resulting injuries.
NOTICE Description of possible
damage of the device or its
surroundings.
2 Symbols
Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Wear ear protection.
Wear protective gloves when changing
tools and working with raw materials.
Wear a dust mask.
Wear protective goggles.
Pull out the mains plug
Disconnecting the mains power cable
Connecting the mains power cable
Direction of rotation of saw and the
saw blade
Tool contains a chip which stores data.
See section 13.1
Handling instruction
Tip or advice
Safety class II
WARNING – Check guarding
system. It must cover the blade instantly!
Hold saw with both hands. Support and
clamp work.
AVERTISSEMENT
Contrôlez le système de
protection. Il doit couvrir instantanément la lame!
Tenez la scie des deux mains. Soutenez et fixez
l'ouvrage.
ADVERTENCIA Compruebe el sistema de seguridad.
Debe cubrir la espada en el acto. Sujete la sierra con
ambas manos. Tarea de apoyo y sujeción.
DANGER –
Keep hands and body
away from and to the side of
the blade. Contact with blade will
result in serious injury.
DANGER – Tenez les mains et le
corps à distance de la lame et sur le
côté de celle-ci. Tout contact avec la
lame provoque des blessures graves.
PELIGRO
– Mantenga las manos y el
cuerpo alejados de la espada y a un lado
de ella. El contacto con la espada
provocará heridas graves.
DANGER Keep hands and body away from and
to the side of the blade. Contact with blade
will result in serious injury.
WARNING Check guarding system. It must
cover the blade instantly! Hold saw with both
hands. Support and clamp work.
W watt
V volt
A amperes
Hz hertz
~
a.c.
alternating current
d.c
direct current
n
0
no load speed
rpm
min
-1
revolutions per minute
revolutions per minute
" inch
lb. pound
diameter
English
6
To Next Page
Loading...
Need help?
General
