Fetco CBS-2111 - Output Settings and Tests; Valve Calibration and Testing

Go to fetco.com for the latest versions of all information Page 9 User Guide & Operator instructions P171 NEW MARCH 2018
OUTPUTS
Programming
Items
Factory set
Default
Programming Range
(display)
Notes
Brew Valve
Calibrate/Test
• Brew Valve (Press to test)
< OUTPUTS >
< Brew Valve >
< Calibrate/Test>
Cal Test
Press To Cal/Test
BASKET IN PLACE
TEMP READY
Runs valve to verify
flow. Have container
under brew basket!
Brew Valve-
CALIBRATE
• Brew Valve
< OUTPUTS >
< Brew Valve >
< Calibrate/Test>
Cal Test
Press To Cal/Test
BASKET IN PLACE
TEMP READY
See pages 10-12 for
detailed calibration
procedure and screens
BYPASS Valve-
CALIBRATE
• BYPASS Valve
< OUTPUTS >
< Brew Valve >
< Calibrate/Test>
Cal .
To Stop press Cal.
CAL IN PROGRESS
See pages 10-12 for
detailed calibration
procedure and screens
Fill Valve
• Fill Valve Test (Press to test)
TEST
Press To Test
Operates fill valve.
Have container under
both brew baskets!
Heater
• Heater Test (Press to test)
TEST
Press To Test
Energizes Heater(s)
Use for servicing.
Buzzer
• Buzzer Test
(Press to test)
TEST
Press To Test
Confirms “BEEP”
Use for servicing.
Screen
• Screen Contrast Contrast
8
|____________[]____|
1 10
• S. Brightness
Brightness
8
|____________[]____|
1 10
TEST
TEST
TEST
CAL
TEST
▲
TEST
CAL
TEST
CAL
▲
Cal
Time
Rem.
1:00