Need help?Do you have a question about the ffelectronics Sidus F1B and is the answer not in the manual?
Overview of the main control board for the electronic timer.
Description of the pocket-sized programmer device.
Details on the rechargeable LiPo battery.
Information about the charger for LiPo batteries.
Timer's automatic sleep state to conserve power when inactive.
Understanding the LED, buzzer, and disc states of the timer.
Instructions for Reset, Start, Start Cancel, and Stop functions.
Steps to read, modify, and write timing intervals for functions.
Switching between absolute and relative timing displays.
Calibrating servo positions for different functions.
Configuring the intermediate jump function for early RDT.
Interpreting the indicator lights on the battery charger.
Connecting and charging the battery for the timer.
Connecting and charging the battery for the programmer.
Diagram and notes for connecting components like charger, switch, and servo.
Instructions for mounting the control board and antenna on the pylon.
Information on battery usage duration and storage.
Proper routing and insulation for optimal RDT antenna performance.
Guidelines for positioning the control board for visibility and heat.
General| Model | Sidus F1B |
|---|---|
| Category | Timer |
| Dimensions | 22.5 x 81 x 99.5 mm |
| Output | Relay |
| Mounting | DIN Rail |
| Power Source | AC/DC |
| Display Type | LCD |
| Alarm | No |
| Mounting Type | DIN Rail |
To Next Page