For more information & Technical support: (+1) 714-671-8500 · support@fg-detection.com 1
1. Introduction
The FlameSpec-IR3-H2-HD flame detector provides ultra-fast response, high performance and reliable
detection of hydrogen (H2) fires.
The detector addresses slow growing fires as well as fast eruptions of fire using improved IR3 technology. The
detector operates in all weather and light conditions. In addition, the detector provides high-definition (HD)
video output of the monitored area with clear imaging of a fire event and of personnel at distances up to 100
ft. (30m).
This allows the rescue team to be aware of the exact situation before entering the hazardous area. The
detector automatically records video of fire event (1 minute pre- and up to 3 minutes post-alarm initiation).
These features, along with the built-in event logger, provide additional means to study the cause and
development of fire events.
1.1 Key Features
• High immunity to false alarm
• Ultra-fast detection mode detection within 40 milliseconds for Hydrogen fireballs or explosions
• Hydrogen flame detection
• High sensitivity – up to 100 ft. (30m)
• HD video output with Automatic HD video recording of fire events
• Data/Event logger – alarms, faults and other relevant events are logged to non-volatile memory
• Ethernet communication – in addition to the standard methods, such as 4-20mA and Modbus
• Built-in-Test (BIT) – Automatic and manual internal self-test of window cleanliness and the overall
operation of the detector
• Window heater to avoid condensation and icing
• Tilt mounting bracket can be connected either above or below the detector.
To Next Page
Loading...