12
Adjusting the central rear seat
belt fig. 10
To tighten:
pull the end A (this
operation can be carried out also
with the seat belt already fastened).
To loosen: pull length B holding
the buckle at right-angles to the belt.
fig. 10
P4E01607
SAFETY BELTS
The adjustments
described below must be
performed before dri-
ving. Avoid performing these
operations when the car is in
motion.
Adjusting the height
of the front seat belts
Fig. 8:
fix the loop in point A or B
fig. 9
P4E01796
Fig. 9
To lift:
lift the loop C.
To lower: keeping the knob
pressed D move the loop C.
fig. 8
P4E01783
To ensure maximum
protection, keep the
backrest in the upright
position, lean back into the seat
and ensure that the seat belt
adheres closely to torso and
hips. Do not use the seat belt
when the seat back is reclined.
To Next Page
Loading...
