54
When the engine is run-
ning, do not put hands
near moving elements.
Be very careful that scarves, ties
or loose clothing do not acciden-
tally get caught in moving parts;
this can be extremely dangerous.
BONNET
To open the bonnet:
1) Pull lever A-fig. 63.
fig. 64
P4E02273
fig. 65
P4E01365
Before lifting the bonnet
check that the wind-
screen wiper arms are
not raised from the windscreen.
Important. Improper
positioning of the support
rod could cause the bon-
net fall violently.
This should only be done
when the car is station-
ary.
2) Press lever A-fig. 64.
3) Lift the bonnet and release the
support rod A-fig. 65 from its clip.
4) Insert the end of the rod in its re-
cess B on the bonnet.
fig. 63
P4E02037
To Next Page
Loading...
