39
CONTROLS (fig. 30)
A
- Air temperature knob (mixing
hot and cold air).
B - Air recirculation slider to cut off
outside air.
C - Fan knob.
D - Air distribution knob.
E - Climate control system on/off
switch. When switched on, it auto-
matically operates the fan at its lowest
speed. The LED on the switch will
come on.
COOLING
1)
Air temperature knob: pointer in
the blue sector.
2) Fan knob: pointer set at the speed
required.
3) Air distribution knob: pointer at
O
.
4) Climate control system: press the
switch
√
and move the air distribution
pointer on
T
.
To reduce the cooling effect: move
the air recirculation slider to -
U
,
increase the temperature and de-
crease the fan speed.
HEATING
1)
Air temperature knob: pointer in
the red sector.
2) Fan knob: pointer set at the speed
required.
3) Air distribution knob: pointer at:
K
to to warm the feet and demist
the windscreen at the same time;
M
to warm the feet and keep the
face cool (bilevel function).
4) Air recirculation slider: to speed
up the heating procedure, move the
air recirculation slider to
T
which
means air inside will be recirculated.
To Next Page
Loading...
