PROGRAMMABLE FEATURES
Electronic Vehicle Information Center (EVIC)
• The EVIC can be used to program the following Personal Settings. Push the MENU
button until menu is displayed, then push the UP
or DOWN arrow button
to scroll through the settings.
• Once the menu setting is shown in the EVIC display push the MENU button to access
the setting and use the UP or DOWN arrow button to change the current
setting. The menu includes the following functions:
• Speed Beep • Language
• TripBData • Buzzer Volume
• See Radio (Repeat Audio Information) • Button Volume
• Speed Display • GSI Shift
• Autoclose • Exit Menu
• Units • Key
Uconnect Customer Programmable Features
The Uconnect system allows you to access Customer Programmable feature settings.
To change a setting:
1. Push the SETTINGS
button located on the right side of the display.
2. Select a programmable feature you would like to adjust.
3. Make your selection highlighting the button.
Depending on the vehicles options, the following feature settings are available:
• Display • Audio
• Clock & Date • Phone/Bluetooth
• Safety/Assist ance • SiriusXM Setup
• Lights • Voice
• Doors & Locks • Restore Settings
• Engine Off Options • Units
• Clear Personal Data
ELECTRONICS
72
To Next Page
Loading...
