ITALIANOENGLISH
23
Steady green: to indicate that the
charging process is complete.
Red flashing: ("Blinking"): this
indicates a charging system failure
or when there is a fault in the
charging procedure (when the
charging connector is connected
to the charging port located on the
vehicle and the cable has not been
previously connected to the power
socket).
WARNING If all the LEDs are off after
connecting the charging connector
to the charging port on the vehicle, a
problem may have occurred during
the process. In this case it is advisable
to press the key (B) in fi g.30 or fi g.31,
disconnect the charging connector
and reconnect it.
30 F1A2067
31 F1A9105
Wearers of pacemakers
or equivalent devices
Consult your doctor to find out what
precautions to take, or inquire with
the manufacturer of the implanted
electromedical device to check
whether its operation is guaranteed
in an environment that complies with
ICNIRP recommendations.
To Next Page