FIBARO FGBHFS-101 User Manual

5
PAIRING THE ACCESSORY
#3: Pairing the accessory
1. Open the Settings app on your iOS device.
2. Go to the Bluetooth® section, and turn the Bluetooth® on.
3. Place the accessory next to your iOS device.
4. Open a HomeKit compatible app of your choosing on your iOS
device.
5. Open pairing window in your HomeKit app to detect available
accessories.
6. Choose Flood Sensor you wish to pair.
7. You can identify it - Flood Sensor will triple blink blue 3 times.
8. Find HomeKit Setup Code on the last page of Quick Start Guide
included in the box that looks like this:
9. Start pairing with your HomeKit app.
10. Point your iOS device’s camera at the Setup Code to scan it or en-
ter the Setup Code manually.
11. If entered Setup Code is valid, the device will complete the setup
process.
12. Follow instructions displayed in the application.
XXX-XX-XXX
NOTE
Remember to keep
your HomeKit Setup
Code in safe place. You
may need it in case of
re-pairing.
i

FIBARO FGBHFS-101 Specifications

General

Connectivity technology	Wireless
Battery type	CR123A
Battery voltage	3 V
Power source type	DC
Number of batteries supported	1
Operating temperature (T-T)	0 - 40 °C
Interface	Bluetooth
Product color	White
Operating frequency	2400 MHz
Measuring parameters	-
Maximum operating distance	50 m

Weight and Dimensions

Depth	28 mm
Width	72 mm