FIBARO FGBHFS-101 - Functionalities; Flooding detection; Tamper detection; Temperature measuring

8
FUNCTIONALITIES
#6: Functionalities
Flooding detection:
The Flood Sensor alarms about ooding whenever water connects
sensor’s probes and reports it to your iOS device.
Until the ooding does not cease, the accessory constantly beeps and
blinks red signaling the alarm.
Tampering signalization is ignored during the alarm.
Tamper detection:
The Flood Sensor detects tampering when the accessory is moved
or casing is opened and reports it to your iOS device.
Tampering is indicated with an alternate blinking in red, blue and
white and one short beep.
Temperature measuring:
The Flood Sensor measures ambient temperature every 10 min-
utes. If the measured temperature diers from previously reported
by at least 1°C (1.8°F), accessory reports it to your iOS device.
Battery level measuring:
The Flood Sensor measures battery level every 24 hours and reports
it to your iOS device. Additionally, if battery level is below 15%, the
accessory will report low level battery status to your iOS device.