FIBARO ROLLER SHUTTER 3 Manual

This parameter determines time needed for roller blinds to reach the bottom.
For modes with positioning value is set automatically during calibration, otherwise, it must be
set manually.
Size: 4 Byte, Default Value: 6000
Setting
Description
1 - 90000
(0.01 – 900.00s, every 0.01s) – movement time
Technical Data
Dimensions
42.50 x 38.25 x 20.30 mm
Weight
27.83 gr
EAN
5905279987197
IP Class
IP 20
Voltage
230 V
Load
1,7 A
Device Type
Roller Shutter
Generic Device Class
Multilevel Switch
Specific Device Class
Motor Control Device (B)
Firmware Version
05.00
Z-Wave Version
06.02
Z-Wave Product Id
0x010f.0x0303.0x1000
Frequency
Europe - 868,4 Mhz
Maximum transmission power
5 mW
Supported Command Classes
 Basic
 Application Status
 Switch Multilevel
 Meter
 Crc 16 Encap
 Association Grp Info
 Device Reset Locally
 Central Scene
 Zwaveplus Info
 Multi Channel
 Supervision
 Configuration
 Alarm
 Manufacturer Specific
 Powerlevel

FIBARO ROLLER SHUTTER 3 Specifications

General

Device Type	Roller Shutter Controller
Protocol	Z-Wave
Radio Protocol	Z-Wave
Dimensions	42.5 x 38.25 x 20.3 mm
Mounting Box Requirements	Ø ≥ 50mm, depth ≥ 60mm
Protection Class	IP20
Maximum Load for AC Output	4.2A
Max Transmit Power	up to 6 dBm
Range	Up to 50m (open space)
Operating Temperature	0°C to 40°C
Z-Wave Frequency	868.4 MHz EU
Compatibility	Works with various Z-Wave and Z-Wave Plus certified devices
Radio Frequency	868.4 or 908.4 or 921.4 MHz EU frequency band