FIBARO ROLLER SHUTTER 3 Manual

 Protection
 Firmware Update Md
 Association
 Version
 Multi Channel Association
 Security
 Transport Service
 Security 2
Controlled Command Classes
 Transport Service
 Security 2
Explanation of Z-Wave specific terms
 Controller — is a Z-Wave device with capabilities to manage the network. Controllers
are typically Gateways,Remote Controls or battery operated wall controllers.
 Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be
sensors, actuators and even remote controls.
 Primary Controller — is the central organizer of the network. It must be a controller.
There can be only one primary controller in a Z-Wave network.
 Inclusion — is the process of adding new Z-Wave devices into a network.
 Exclusion — is the process of removing Z-Wave devices from the network.
 Association — is a control relationship between a controlling device and a controlled
device.
 Wakeup Notification — is a special wireless message issued by a Z-Wave device to
announces that is able to communicate.
 Node Information Frame — is a special wireless message issued by a Z-Wave device to
announce its capabilities and functions.
(c) 2019 Z-Wave Europe GmbH, Antonstr. 3, 09337 Hohenstein-Ernstthal, Germany, All rights
reserved, www.zwave.eu. The template is maintained by Z-Wave Europe GmbH. The product
content is maintained by Z-Wave Europe GmbH , Supportteam, support@zwave.eu. Last update
of the product data: 2019-02-08 13:50:00

FIBARO ROLLER SHUTTER 3 Specifications

General

Device Type	Roller Shutter Controller
Protocol	Z-Wave
Radio Protocol	Z-Wave
Dimensions	42.5 x 38.25 x 20.3 mm
Mounting Box Requirements	Ø ≥ 50mm, depth ≥ 60mm
Protection Class	IP20
Maximum Load for AC Output	4.2A
Max Transmit Power	up to 6 dBm
Range	Up to 50m (open space)
Operating Temperature	0°C to 40°C
Z-Wave Frequency	868.4 MHz EU
Compatibility	Works with various Z-Wave and Z-Wave Plus certified devices
Radio Frequency	868.4 or 908.4 or 921.4 MHz EU frequency band