FIBARO Smoke Sensor User Manual

Installation and Operation Guide
Smoke Sensor Page | 11
7. On the Smoke Sensor, press the B-button three times and ensure that the
LED turns white and that the Active SmartHome Gateway beeps once.
8. Once detected, the platform will display the Sensor ID. To finalize the
installation process, click on the “ Add Sensor ” button (Fig. 07).
Figure 06 Preparing Smoke Sensor for operation
Figure 07 The Smoke sensor is detected

FIBARO Smoke Sensor Specifications

General

Sensor Type	Photoelectric
Battery Type	CR123A
Wireless Technology	Z-Wave
Operating Temperature	0°C to 55°C
Dimensions	65 x 28 mm
Alarm Sound Level	85 dB
Radio Frequency	868.4 MHz (EU) / 908.4 MHz (US)
Humidity Range	0% to 93% (non-condensing)
Range	Up to 50 meters outdoors
Sensitivity	EN 14604:2005
Certifications	EN 14604