Fibocom FM160 Series - Pin Definition

Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved.
FM160-NA Hardware Guide 18/27
3.1.2 Pin Definition
Table 3-2 Pin definition
Pin Pin Name
I/
O
Reset Value Pin Description Type
1 CONFIG_3 O NC
NC, FM160 M.2 module is
configured as the WWAN – PCIe
with the USB_SS interface type
-
2 VCC PI - Power input
Power
Supply
3 GND - - GND
Power
Supply
4 VCC PI - Power input
Power
Supply
5 GND - - GND
Power
Supply
6
FULL_CARD_
POWER_OFF#
I PU
Module power-on/off control, the
module is powered off when the
pin is at low level, and the module
is powered on when the pin is
floating or at high level. Pulled up
through Internal 390KΩ resistor.
3.3V/1.8V
7 USB D+
I/
O
- USB 2.0 Data+ 0.3V-3V
8 W_DISABLE1# I PU
Disable flight mode of WWAN
module, active low
3.3V/1.8V
9 USB D-
I/
O
USB 2.0 Data– 0.3V-3V