Need help?Do you have a question about the Fibocom MG661-LA-19 and is the answer not in the manual?
Provides detailed descriptions for power, control, baseband, RF, and USB interface pins.
Details power-on, power-off, and reset functions for module control.
Describes USB, UART, I2C, PCM/I2S, SIM, ADC, and status indication interfaces.
Covers antenna interface, classification, impedance design, and passive testing.
Provides critical information for OEM integration and compliance.
Outlines FCC compliance for radiation exposure limits and installation requirements.
Provides detailed descriptions for power, control, baseband, RF, and USB interface pins.
Details power-on, power-off, and reset functions for module control.
Describes USB, UART, I2C, PCM/I2S, SIM, ADC, and status indication interfaces.
Covers antenna interface, classification, impedance design, and passive testing.
Provides critical information for OEM integration and compliance.
Outlines FCC compliance for radiation exposure limits and installation requirements.
General| Category | Computer Hardware |
|---|---|
| Form Factor | LGA |
| Operating Temperature | -30°C to +75°C |
| Storage Temperature | -40°C to +85°C |
| Max Upload Speed | 50 Mbps |
| Supported Bands | B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B26/B28/B38/B39/B40/B41 |
| GNSS Support | GPS/GLONASS/BeiDou/Galileo |
| Interface | USB 2.0, UART, GPIO, I2C, PCM |
| Power Supply | 3.3V to 4.3V |
| Certifications | CE, FCC, IC, PTCRB, GCF, RCM, NCC |
To Next Page
