3 - 23
BIOS Setup
Load Fail-Safe Defaults
This submenu is selected to diagnose the problem after the computer boots, if
the computer will not boot. These settings do not give optimal performance.
Under the BIOS Feature Setup, if Setup is selected under the Security Option
field and the Supervisor/User Password is enabled, you will be prompted
password every time you try to enter the CMOS Setup Utility. If System is
selected and the Supervisor/User Password is enabled, you will be requested
to enter the Password every time when you reboot the system or enter the
CMOS Setup utility.
Load Optimized Defaults
This submenu is selected for default settings which provide the best system
performance.
Supervisor/User Password
To enable the Supervisor/User passwords, select the item from the Standard
CMOS Setup. You will be prompted to create your own password. Type your
password up to eight characters and press Enter. You will be asked to confirm
the password. Type the password again and press Enter. To disable password,
press Enter twice when you are prompted to enter a password. A message
appears, confirming the password is disabled.
CPU Host/PCI Clock/3V66
This feature allows you to select the combinations of CPU, onboard de-
vices (such as AGP bus, South Bridge) that runs with 66MHz frequency,
and PCI clock frequency. The default setting, Default, will detect your
CPU/PCI/3V66 clock frequency automatically. If you set a unappropriate
option which leads to a booting problem, keep pressing the Insert key
until the display appears will solve it. The options lists all combinations
that provided by the system BIOS.
To Next Page
Loading...
