Fichet-Bauche NECTRA BASIC - 3 Configuration of the System (Advanced User); Changing an Opening Code

33
F
GB
E
D
I
P
NL
Nectra
3. Configuration of the system (advanced user)
Keep the door opened while changing the configuration.
3.1 Changing an opening code
If you wish to modify another setting, go back to point * and repeat the operations.
- An opening code may be made up of 6, 7 or 8 digits.
- You can modify the code even if the operator is not activated.
Orange light Green light
C Type in the master code +
C When the green light is displayed, open the door.
*C Door opened, type in master code again +
C Select one operator (9 possibilities) by typing :
- "0" + for master code.
- "1" +
for operator 1.
.
.
.
- "7" + for operator 7.
- "8" +
for C.I.T. operator.
C Type in the new code +
C Type in the new code again +
Changing an opening code
X2
or
or
or
X2