Fichet-Bauche NECTRA BASIC - Reconfirming the Code after Time Delay Has Elapsed

43
F
GB
E
D
I
P
NL
Nectra
3.6 Reconfirming the code after time delay has elapsed
When a delay before opening is set on the lock, you can choose to re-dial, or not, the code
when the delay has elapsed.
The default setting of the lock is : code reconfirmation activated, refer to chapter 7 : «Factory
settings».
3.6.1 Activating the code reconfirmation after delay
Orange light Green light
C Type in the master code +
C When the green light is displayed, open the door.
C Door opened, Type in master code again +
C Type "17" +
C Type "1" +
The function is inactivated.
Reconrming the code
X2
X2