Fichet-Bauche NECTRA BASIC - Page 35

35
F
GB
E
D
I
P
NL
Nectra
3.2.2 deactivating operators
If you wish to modify another setting, go back to point * and repeat the operations.
Even if an deactivated code does not allow the opening, it is kept in memory.
Green light
C Type in the master code +
C When the green light is displayed, open the door.
*C Door opened, type in master code again +
C Type "9"+
C Select an operator (8 possibilities) by typing :
- "1" + for operator 1.
- "2" +
for operator 2.
.
.
.
- "7" + f or operator 7.
- "8" +
for C.I.T. operator
C Type "0"+
The operator’s code is deactivated.
Activating / deactivating operators
X2
X2
X2
or
or
or
Orange light