Field Controls UV-AIRE UV-12 User Manual

www.fieldcontrols.com
Please retain these instructions after installation.
This device MUST be installed by a qualified agency in accordance with the manufacturer's installation instructions. The definition of
a qualified agency is: any individual, firm, corporation or company which either in person or through a representative is engaged
in, and is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the
precautions required, and has complied with all the requirements of the authority having jurisdiction.
This product is not sold as a medical device and is not for the purpose of diagnosis of any disease or condition nor for
use in the mitigation, treatment, or prevention of any disease or condition.
READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION.
Installation Date:
Installed By: Phone:
SAFETY CONSIDERATIONS
WARNING: Never expose eyes or skin to UV-C light from any source.
Looking directly at the UV-C light may cause permanent eye damage or blindness.
•
Never operate the UV-Aire Air Purifying System out of the plenum.•
Designed for a closed duct system. Do not mount near a return air opening•
All duct openings in direct line of site of the UV light must be sealed with duct tape or equivalent •
sealing methods.
WARNING: UV light will break down plastic materials not rated for UV exposure:
(Examples: wire insulation, flex duct, drain pans and humidifiers)
The unit must be mounted at least 30” from the above stated type of materials.
•
If it is necessary to mount the unit in direct line of sight of these types of materials, they must be •
shielded with aluminum foil, aluminum foil tape, or sheet metal.
WARNING: DO NOT mount this unit outdoors.
This product is designed for indoor installation only (i.e. attics, crawl spaces, basements, etc.).
•
UV-AIRE
®
AIR PURIFYING SYSTEM
MODEL: UV-12, UV-18
ITEMS INCLUDED IN KIT:
1- UV-Aire power unit
4- Sheet metal mounting screws
1- Angled mounting bracket
1- Flat mounting bracket
1- Duct board mounting bracket
1- Ultraviolet lamp
1- Instruction Sheet
1- Wing nut
Caution Labels
Gasket
UV-C light inhibits the growth and reproduction of germs and bacteria that circulate through a home’s
heating and air conditioning system. The treatment is a safe, silent, and proven way to make your home a
healthier place to live.
AFTER OPENING THE CARTON, UNPACK AND INSPECT THE UNIT AND LAMP FOR DAMAGE.
DO NOT INSTALL THIS UNIT IF ANY DAMAGE IS NOTICEABLE.

Field Controls UV-AIRE UV-12 Specifications

General

Product Type	UV Air Purifier
Model	UV-12
Category	Air Cleaner
Lamp Life	9000 hours
Voltage	120 V
Frequency	60 Hz

Summary

Safety Considerations

Eye and Skin Exposure Warning

Warning against direct exposure of eyes or skin to UV-C light, which can cause permanent damage.

Material Degradation Warning

UV light can break down plastic materials not rated for UV exposure; unit must be mounted away from them.

Outdoor Installation Prohibition

Warning that this unit is designed for indoor installation only and must not be mounted outdoors.

General Information

Product Specifications and Usage

Details unit specifications like duct width, voltage, and maximum air temperature for different models.

Installation

Locating the Unit in the Plenum

Instructions on selecting a suitable location for the unit downstream from the 'A' coil in the supply or return plenum.

Installation for Flex Duct Systems

Branch Duct Attachment Dimensions

Provides dimensions for branch duct attachments ('A', 'B', 'C') for flex duct installations.

Installation for Metal Duct Systems

Mounting Template and Cutting

Instructions for applying a mounting template, drilling holes, and cutting openings for metal duct installations.

Installation for Duct Board Systems

Mounting Plate and Cutting Procedure

Steps for mounting the plate, cutting openings, and securing the unit to duct board.

Bracket Selection and Unit Mounting

Flat Bracket Installation

Procedure for installing the flat mounting bracket and securing the unit base.

Angled Bracket Installation

Procedure for installing the angled mounting bracket and securing the unit base.

Final Assembly and Power

Lamp Installation and Power Up

Steps for replacing the cover, plugging in the unit, and verifying lamp operation.

Bulb Mounting Bracket Configurations

Bracket Mounting Positions

Compares standard 90° flat bracket installation with patent pending 45° angle bracket installation.

Angled Mounting Bracket Specifications

Offset Dimensions for Angled Brackets

Provides dimensions for proper mounting clearances when using angled brackets.

Maintenance and Lamp Replacement

Routine Maintenance Schedule

Recommendations for inspecting and cleaning the lamp every six months.

Lamp Replacement Procedure

Detailed steps for safely unplugging, disassembling, and replacing the UV lamp.

Replacement Parts List

Model-Specific Part Numbers

Lists part numbers for UV-Aire lamps and ballasts for UV-12 and UV-18 models.

Limited Warranty

Warranty Terms and Conditions

Outlines warranty period, exclusions, and conditions for repair or replacement of products.