FIELD ONE Force - Page 14

CAUTION: READ AND FOLLOW ALL SAFETY GUIDELINES AND WARNINGS BEFORE HANDLING OR
ATTEMPTING ANY WORK ON YOUR FIELD ONE PAINTBALL MARKER. SHOULD YOU BE UNSURE AT ANY
POINT, STOP AND GET HELP FROM A FIELD ONE PAINTBALL CERTIFIED TECHNICIAN.
A
AB
AB
LeverLock Feedneck
The Field One Force comes equipped with the new LeverLock clamping feedneck. This feedneck is adjustable without tools and allows for
the use of a variety of different motorized loaders and ensures a snug fit. Do not overtighten the clamping lever screw as this may cause
damage to the feedneck or the clamping lever bolt. If the lever ever becomes too tight to manipulate with your fingers, you can use a 1/8th
inch allen wrench to loosen the LeverLock assembly.
Force GRIP SHIFT (Dual Position) Foregrip (Battery Compartment)
The Force Foregrip is designed to provide 2 different mounting points so the user can choose the foregrip stance or distance that is most
comfortable for their playing style. The Force Foregrip position change involves separating the foregrip (also the AA(2) battery compartment)
from the reversal plate and then switching the orientation of the Force Foregrip Reversal Plate before reinstalling the foregrip. This
adjustment operation is not meant to be performed while playing or operating the marker. It is highly recommended that this adjustment
operation is done where there is a clean flat surface to work with and all of the separate components of the marker are removed (REMOVE
loader, tank, barrel). The foregrip (battery compartment) will remain connected to the marker with the power supply wire harness. Excessive
pressure or tension on this wire harness while changing foregrip positions will cause power failure or damage the electronic components in
the marker. Please refer to the Grip Shift instructions or the Grip Shift Video Tutorial before starting this process
A
A
Reversal Plate Mounting Screws
Reversal Plate
Foregrip Housing
Foregrip Mounting Screws
Battery Board
Foregrip Core
AA Batteries
Battery Door
Feedneck
Cam Pivot
Lever
Adjuster Nut
Adjuster Knob
Locking Screw
Adjuster Bolt