FIELD ONE Force - Key Components and Features; Force Grip Frame and Electronics

CAUTION: READ AND FOLLOW ALL SAFETY GUIDELINES AND WARNINGS BEFORE HANDLING OR
ATTEMPTING ANY WORK ON YOUR FIELD ONE PAINTBALL MARKER. SHOULD YOU BE UNSURE AT ANY
POINT, STOP AND GET HELP FROM A FIELD ONE PAINTBALL CERTIFIED TECHNICIAN.
A
AB
Force Grip Frame
The Force grip frame houses the main board (Force Mainboard) for the Force, the OLED screen and Power Button, the HPR (Rhino
Regulator), velocity adjustment screw, trigger assembly and provides the mounting point for the Cam Drive ASA. Custom overmolded dual
durometer rubber grips protect the internals of the grip frame while providing the perfect amount of tactile function for the user to change
hands while operating and keep a firm grip when needed. The grip frame does not need to be removed during normal maintenance of the
Field One Force. Keeping the grip frame and the electronics within the grip frame free of moisture and debris is important and can be
maintained by removing both sides of the rubber grip panels. Access to the TOURNAMENT/BOARD LOCK button on the Force BLU18
Board can be had by removing the left-side grip panel. The Rhino Regulator can be accessed by removing the Cam Drive ASA from the
bottom of the grip frame.
C
Manifold Mounting Screws
Drive Manifold
Top Mainboard
Mounting Screws
Bottom Mainboard
Mounting Screw
Mainboard
C
AB
A
Bezel
OLED Screen
Power Button
PCB Board
1x3 Drive Manifold to Solenoid
1x4.5 Drive Manifold to Solenoid
PCB and Bezel Mounting Screws
Cam Drive ASA
Rhino Regulator
Downstream Bleed Valve
Gripframe
Front Gripframe to Body
Mounting Screw
1x3.5 Input
Manifold to Gripframe
1x3 DInput
Manifold to Solenoid
Input Manifold
KO Trigger
ASA Mounting Screws
Solenoid
Trigger Mounting Screw