5
Quick Start
1. Install the included six AA batteries into rear
battery compartment.
2. Press center blue button for 2 seconds to
turn on your new SMAN manifold.
3. Connect your hoses and pipe clamps to the
SMAN manifold and to the system.
4. View live pressures and temperatures.
5. Use arrow buttons to select a refrigerant and
view calculations in real-time!
What’s Included
• SM380VINT SMAN Refrigerant Manifold
(3 Port)
• (2) TC24 Type K Pipe Clamp Thermocouples
• (1) ATA1 Type K Bead Thermocouple w/Clip
• (1) Year Warranty
• Operator’s Manual
To Next Page
Loading...
