Fieldpiece SMAN SM480VINT - Menu Navigation and Settings

22
Menu
Press MENU to enter the menu where most
settings are located. Use arrows to scroll through
the menu and press ENTER to select one of the
below menu items.
LogData: Enter data logging setup mode (page 23).
(StopLog): If data logging, stop the log (page 23).
AutoO: Enter auto o timer setup mode (page 24).
CalTemp: Enter calibration mode for Type K jacks (page 25).
Wireless Sources: Enter wireless source setup mode (page 26).
TSH Sources: Enter target superheat source setup mode (page 27).
Units: Enter units setup mode (page 28).
Vac Alarms: Enter vacuum alarm setup mode (page 28).
Mute: If unmuted, mute the speaker.
(Unmute): If muted, unmute the speaker.
Backlight Timer: Enter backlight timer setup mode (page 29).
Adv Pressure Cal: Enter advanced calibration mode for pressure
sensors (page 30).
F Ware: Enter rmware view and update mode (page 32).
Restore Settings: Enter restore factory settings mode (page 33).
(Delete Log File): If a log le is saved to the internal ash drive,
enter delete log le mode (page 34).
Format Drive: Enter format drive mode (page 34).