COMMAND WORKSTATION 19
4 To apply finishing options (for example, stapling or sorting) to each chapter created using
the Chapter Start feature, select the “Define Each Chapter As A Separate Finishing Set”
option.
NOTE: Not all finishing options can be applied to chapters that contain mixed sizes of media
(for example, Letter and A4).
5 To define properties for front and back covers, click Define Cover.
For more information, see “To define cover media settings” on page 20.
6 To define properties for individual pages or page ranges, click New Page Range.
For more information, see “To define media for specific pages” on page 21.
7 To insert blank pages, click New Insert.
For more information, see “To insert blank pages” on page 21.
8 To modify or delete a current definition, select it in the Mixed Media Definition list, and click
Edit or Remove.
If you click Edit, enter new settings for the definition and click Modify.
9 After you finish defining Mixed Media settings, click OK to close the Mixed Media window and
Job Properties.
The Mixed Media settings are applied to the job.
NOTE: You can save up to 100 different settings for the Selection list in the Mixed Media
dialog box.
To Next Page
Loading...
