7
2.1 Installation guide
How to install the head tube.
③ Adjust the direction of the handlebars,
and try to lock the riser screws.
④ Spread the handlebars to the left
andright sides.
① Take out the scooter handlebars.
② Insert the handlebars into the head tube
towards the seatcusion.
The basic installation of the bike has been completed before out of the factory. When you receive the Scooter, you
only need to install and adjust the head tube and pedal.
Caution: Make sure to lock it firmly, to avoid the head
tube loosening during use.
To Next Page
Loading...
