Fiido Q2 - First Time Using

11
2.2 First time using
Before riding, please follow the installation guide to install components properly, check whether the firmware is loose,
ensure sufficient power, and take appropriate protection for riding.
① Unlock the battery to the“ON”position；Then long press the M button on the meter for about 3 seconds until
the display screen lights up.
② Adjust the front shock absorption according to riding requirements: rotate the left button of the front fork
to the direction of "+" to harden the front fork (faster rebound speed). Rotate to the direction of "-" to soften
the front fork(slower rebound speed);
ABS+
off
o
n
Step 1：Turn on the power and adjust the suspension fork
2
1
3