12
Step 4：Start riding
Please take corresponding protection before starting riding.
Step 5：Braking introduction
Step 3：How to adjust the riding mode.
Switch and choose the riding mode according to the cycling road conditions and personal needs.
① Electric mode：Equipped with pure electric mode, gently press down the electric mode button to switch
to the pure electric mode, the stonger the press, the faster the speed
② Single-dual drive system: The scooter is equipped with single-drive and dual-drive functions. Press the R button
to start the single-drive function. At this time, only the rear motor works. Press the I button to start the dual-drive
function. The front andrear motors work at the same time, and the dual drive signal will be flashing on the
dashboard.
The left side is front brake, the right side is rear brake. While riding, it’s recommended to use the rear brake
first, then the front brake to slow down the speed to stop, in order to avoid falling accident caused by balance
problems from urgent front wheel brake.
To Next Page
Loading...
