Fiido X - Coded Lock Instructions

1. Start the power: Input the original password “012345”+” ”, to start the bike power.
2. Change the password: ① Press " " + " " at the same time till 4 sec, then loose hand.
2.3 Coded lock instructions
The original password is “012345”. After receiving the bike, the password can be customized.
Please follow the following steps:
Caution:
① The setting will with a long beep if it’s succeed.
② The setting will with 3 short beeps if it failed, then you may need to repeat the above steps, or contact the after-sales
team by sending the operation video.
Password modification
0
1
2
3
4
5
6
7
8
9
o
② Input the orginal password “012345”+” ”, then input the new six-digit password
“******”+” ”to finish the password modification.
12