2.4 Charging instructions
The seatpost battery comes with a small amount of electricity, before the first time use, please make sure to charge it
to full power before riding.
1. Charging connection: Connect the charging interface of the charger to the charging port, then connect the power
plug of the charger to the power socket.
2. Fully charged：When the indicator light of the charger is red, means it’s normal charging. When the light is green,
means it’s fully charged.
3. Charging hour: Charging hour is around 7-9 hours, The duration depends on the situation.
4. Disconnect charging: When the indicator light turns green, means it’s fully charged. Unplug the power plug first,
then remove the charging interface from the battery. Close the battery dust cover.
5. Charging mode: The bike supports two charging modes: vehicle charging and disassembly battery charging. Please
see P13 for how to remove the battery.
Caution: Charger has high voltage device, DO NOT repair without permission. In order to avoid danger, battery and
charger should be placed away from children. There should be no inflammable and explosive objects
around the batteries (such as car seat cushions, sofas, etc.). Keep the battery in a ventilated and dry place,
and make sure NOT to charge in open-air place, to avoid electrical short circuit fire and other accidents
caused by rain and other factors, and to prevent liquid and metal particles into the electrical parts.
Danger: Charging can be allowed on public charging equipment, but the matching between the bettery and the
charging equipment should be fully considered.
Warning: If there’s any odor or high temperature during charging, please stop charging immediately and contact
after-sales team for assist.
Charging
14
To Next Page
Loading...
