5
1. Thread the 1-1/4” pipe into
the tank adapter. Seal
threads liquid tight with
appropriate sealant.
(Figure 1)
Materials:
1-1/4” pipe cut to a length that will extend to within 3” of the bottom of the tank
when screwed into the tank adapter with the tank adapter screwed into the tank
flange (see SKID TANK INSTALLATION diagram).
Threaded pipe joint sealant appropriate for application.
Installation Procedure:
Typical Skid Tank Installation
Figure 1
Assembly View
Pump
Gasket
Screen
Tank Adapter
Suction Tube
(1-1/4” pipe)
To Next Page
Loading...
Need help?
General