- 6 -
2 - TECHNICAL CHARACTERISTICS
ELECTRICAL POWER SUPPLY 220VAC - 50Hz
MAXIMUM POWER MODELS 400 AND 500 500W
MAXIMUM POWER MODELS 200 AND SLIM 250W
FUSE MODELS 400 AND 500
5A T
FUSE MODELS 200 AND SLIM
3.15A T
MIN/MAX SUPPLY PRESSURE [bar] 1 / 5
PUMP MAXIMUM PRESSURE [Bar] 9
MIN/MAX WATER TEMPERATURE [°C] 5 / 35
MAX PERMITTED CHLORINE [PPM] 0.2
MAX PERMITTED IRON [PPM] 0.1
MAX PERMITTED MANGANESE [PPM] 0.1
MAX SALINITY [µS/Cm] 1500
MIN/MAX AMBIENT TEMPERATURE [°C] 5 / 40
MAX RELATIVE HUMIDITY [%] 95
NOMINAL PERFORMANCE*
MODEL
PRODUCTION
15°C
PRODUCTION
25°C
RECOVERY
RATE
REJECTION
SUPPLY
FLOW RATE
200 140 200
50% 92% / 95% 400 L/h
400 280 400 50% 92% / 95% 800 L/h
500 440 500 50% 92% / 95% 1000 L/h
*The performances in the table are average values obtained in standard test conditions,
in particular with water prepared with NaCl at 500ppm. The conditions can greatly vary
based on the real conditions, the temperature and wear status.
To Next Page
Loading...