Fimap IMx - Setting Up the Machine Before Use; Choose your Floor Pad

© Copyright A+D Supplies 2017 A+D Supplies, Marsh House, Brunel Road, Newton Abbot, Devon, TQ12 4PB www.adswsupplies.com
1. Choose your
Floor Pad
2. Unscrew the
Centre Cap
3. Attach the Floor
Pad
4. Tighten Centre
Cap
Red
Polished floors and
delicate areas
Blue
As red but slightly more
abrasive for heavier soiled
floors
Green
Heavy duty scrub for safety
flooring
Place the Drive Board on
the floor and unscrew the
centre cap
Remove the centre from
the floor pad and fit to
Drive Board, push to locate
with your thumbs.
Fit and tighten the centre
cap.
DO NOT OVER-TIGHTEN
Setting Up the Machine Before Use