Fimap IMx - User Manual

© Copyright A+D Supplies 2017 A+D Supplies, Marsh House, Brunel Road, Newton Abbot, Devon, TQ12 4PB www.adswsupplies.com
GUIDE INCLUDES
 Setting up for use
 Using the machine
 Cleaning after use
 Care & maintenance
Instruction Manual for Fimap iMx

Summary

Setting Up the Machine Before Use

Choose your Floor Pad

Select floor pad based on floor type and soil level (Red, Blue, Green).

Switch the Machine On

Engage Drive Board

Switch on brush motor

Start Cleaning

Commence cleaning by moving the machine forward.

Using the Machine

Standard Cleaning

Move machine in straight lines, overlapping each pass for standard cleaning.

Deep Cleaning

Perform deep cleaning by adjusting settings, scrubbing, and solution pickup.

Cleaning After Use

Emptying Recovery Tank

Empty the recovery tank and rinse it with clean water after use.

Emptying the Solution

Drain the solution tank via the bung and clean its filter.

Remove and clean Squeegee bar

Clean bowl filter cover

Charging Battery and Storage

Check the Battery charge level

Charge Battery

Connect charger, switch on, and charge until the green light indicates completion.

Fimap IMx Specifications

General

Category	Floor Machine
Battery Voltage	24 V
Weight	140 kg
Model	IMx
Working Width	510 mm
Noise Level	68 dB