Need help?Do you have a question about the Fimap MXR and is the answer not in the manual?
Details the information and location of the serial tag on the machine.
Provides instructions on how to access the serial tag on the machine.
Addresses common problems with the electrical system and provides solutions.
Addresses common issues with the mechanical scrubbing system and their solutions.
Addresses common problems with the drying system and provides solutions.
Addresses issues related to the machine's frame and traction system.
Addresses problems with the solution delivery system and offers solutions.
Procedure for disassembling electrical components like key switch and control card.
Steps for disassembling the mechanical friction system components, including brush deck.
Procedure for disassembling the drying system parts like squeegee and vacuum hose.
Guide to disassembling frame and traction system components like wheels and steering.
Steps for disassembling the solution tank, hoses, and valves.
Lists the main components of the electrical system.
Explains the function of the main card and dashboard in the electrical system.
Identifies the physical location of various electrical components on the machine.
Details 150-hour checks for electrical system, emergency button, electrobrake, and batteries.
Lists alarm codes for overcurrent, temperature, traction, and general errors with their meanings and solutions.
Covers checks and maintenance for motor, brass bushings, bumping wheel, brush base, lifting mechanism, coupling flange, and fixing plate.
General| Model | MXR |
|---|---|
| Category | Floor Machine |
| Runtime | Up to 4 hours |
| Power supply | Battery |
| Voltage | 24 V |
| Brush type | Disc |
To Next Page
